Справочник Пользователя для Honeywell International Inc. 75EL0N
2 - 12
Connecting the Terminal to a Computer via a USB Connection
You can transfer files (e.g., pictures, music, and videos) between your computer and the terminal using the supplied USB
Charge/Communication cable or a Dolphin 70e Black HomeBase with a standard USB cable.
Charge/Communication cable or a Dolphin 70e Black HomeBase with a standard USB cable.
Note: The terminal supports Hi-Speed USB communication (USB 2.0) with a maximum data transfer rate of 480 Mbps.
1. Connect the terminal to your computer using the USB Charge/Communication cable supplied.
On the status bar, the following notification briefly appears to indicate the hardware connection has been established:
Connected as a media device
2. The computer views the terminal as an external USB storage drive. You can now copy, delete and/or move files or folders
between the computer and the terminal or the microSD card installed in the terminal as you would with any other storage
drive (e.g., cut and paste or drag and drop).
drive (e.g., cut and paste or drag and drop).
3. When you are finished transferring files, follow the proper procedure for your computer’s operating system to safely remove
the hardware (e.g., unmount or eject) before attempting to disconnect the terminal from the computer or turning off the USB
storage setting. Data corruption may occur if the proper removal processes are not followed.
storage setting. Data corruption may occur if the proper removal processes are not followed.
File Browser Power Tool
File Browser provides a graphical utility to browse the files stored on the terminal and the microSD card.
Touch All Apps
> Power Tools
> File Browser
to open the browser.
Touch a folder name or file name to open the folder or file.
Note: Due to system permissions, some files cannot be opened. Depending on the associated application(s), a choice of
applications may be available to open the file.
Browser Menu
Press the Menu button
and touch Home to return to the root folder or Close to exit the File Browser.
\Honeywell
The Internal storage\Honeywell folder on the Dolphin terminal is semi-permanent storage on the terminal. By default, files
in this folder are maintained after a reboot.
in this folder are maintained after a reboot.
Upgrades for the Power Tools and other system software on the Dolphin terminal come in the form of zip files. When the zip
files are placed in the \Internal storage\Honeywell\Autoinstall folder on the Dolphin terminal, they are automatically
installation after a Hard Reset (see page
files are placed in the \Internal storage\Honeywell\Autoinstall folder on the Dolphin terminal, they are automatically
installation after a Hard Reset (see page
) if AutoInstall is enabled (see below). Upgrades are available the from
www.honeywellaidc.com
.
Note: To copy the Power Tools upgrade files, an active USB connected session must be initiated between a host
workstation (see page
USB Port on Host Device
USB Door
1
3
2
Micro USB Port
Right Side Panel
of the Terminal
of the Terminal
USB Charge/Communication Cable
Preliminary Draft, Not for Release - Please Review 2-3-2015