Справочник Пользователя для Rohde & Schwarz Inc SLV8000
Chapter 5
Operating
2100.4400.32
- 5.64 -
E-2
5.5.7
TV Settings > Input > Sound > Input NICAM Cod
Input Clipping
[AF1 / AF2]
[AF1 / AF2]
If the AF signal AF1 or AF2 exceeds the maximum permissible input
level, the amplitude is limited. This is signaled by the Input Clipping sta-
tus display.
level, the amplitude is limited. This is signaled by the Input Clipping sta-
tus display.
NICAM 728 Datas-
tream
tream
Indicates that a NICAM 728 data stream is present
Setting item
Explanation
Nominal Level FM/
NICAM [AF1 / AF2]
NICAM [AF1 / AF2]
Used to set the nominal input level for the AF signal AF1 or AF2
Gain Adjustment
NICAM [AF1 / AF2]
NICAM [AF1 / AF2]
Used to adapt the nominal input level for the AF signal AF1 or AF2
which is fed to the integrated NICAM coder
which is fed to the integrated NICAM coder
Preemphasis [FM]
Used to switch the pre-emphasis required by the respective TV standard
(50
(50
s or 75 s) on or off for FM sound
Preemphasis
[NICAM]
[NICAM]
Used to switch the pre-emphasis required by the TV standard on or off
for NICAM sound
for NICAM sound
Lowpass [FM]
Used to switch a low-pass filter on or off for FM sound
Display
Explanation
Current Input Level
FM [AF1 / AF2]
FM [AF1 / AF2]
Indicates the current input level at the FM sound modulator for the AF
signal AF1 and AF2 as a percentage of the maximum drive level
signal AF1 and AF2 as a percentage of the maximum drive level
Current Input Level
NICAM [AF1 / AF2]
NICAM [AF1 / AF2]
Indicates the current input level at the NICAM coder for the AF signal
AF1 and AF2 as a percentage of the maximum drive level
AF1 and AF2 as a percentage of the maximum drive level
Input Clipping FM
[AF1/AF2]
[AF1/AF2]
If the AF signal AF1 or AF2 exceeds the maximum permissible input
level, the amplitude is limited. This is signaled by the Input Clipping sta-
tus display.
level, the amplitude is limited. This is signaled by the Input Clipping sta-
tus display.
Input Clipping NICAM
[AF1 / AF2]
[AF1 / AF2]
If the AF signal AF1 or AF2 is amplified beyond the permissible input
level at the NICAM coder, the amplitude is limited. This is signaled by
the Input Clipping NICAM status display.
level at the NICAM coder, the amplitude is limited. This is signaled by
the Input Clipping NICAM status display.
Display
Explanation