Справочник Пользователя для Rohde & Schwarz Inc SLV8000
Chapter 5
Operating
2100.4400.32
- 5.67 -
E-2
6.3
TV Settings > RF Out > Output
6.4
TV Settings > RF Out > IQ Adjust
When the transmitter is delivered, the I/Q modulator is factory-adjusted so that no customer
intervention is normally required. If further I/Q adjustment is needed at a later time, the RF
OUT > IQ Adjust menu window provides the associated setting options.
intervention is normally required. If further I/Q adjustment is needed at a later time, the RF
OUT > IQ Adjust menu window provides the associated setting options.
Note
The chapter "Maintenance" describes how to perform I/Q adjustment.
Setting item
Explanation
RF Output
Enables (On) or disables (Off) the RF output
RF Slope
Used to correct asymmetry of the amplitude-frequency response in the
spectrum in order to precorrect the output stage and filter
spectrum in order to precorrect the output stage and filter
Modulation Slope
Used to correct curvature of the amplitude-frequency response in the
spectrum in order to precorrect the output stage and filter
spectrum in order to precorrect the output stage and filter
Vision/Sound
Carrier 1
Carrier 1
Used to set sound carrier level 1 referenced to the peak envelope power
of the vision carrier (Analog TV only)
of the vision carrier (Analog TV only)
Vision/Sound
Carrier 2
Carrier 2
Used to set sound carrier level 2 referenced to the peak envelope power
of the vision carrier (Analog TV only)
of the vision carrier (Analog TV only)
Residual Carrier
Used to set the residual carrier in percent
Setting item/
Display
Display
Description
I/Q Testsignal
For switching a test signal on or off so that I/Q adjustment can be carried
out manually
out manually