Справочник Пользователя для Rohde & Schwarz Inc SLV8000

2100.4400.32

- 5.77 -

E-2

If the monitor module displays OK in the Rx OK field in the menu TV Settings > DVB >
Monitor (or Monitor AUX) > Setup, the DVB-T/-H parameters that the monitor module has
determined are listed here and are valid.

This menu displays the measured values of the associated receiver module.

Synchronized

Indicates whether the DVB-T/-H monitor was able to synchronize to the 
received DVB-T/-H signal

Estimated S/N

Estimated (!) signal/noise ratio at the input of the monitor module

The maximum displayed value is approx. 24 dB, even if the actual value 
is better.

BER before Viterbi

Bit error rate upstream of the Viterbi decoder

BER after Viterbi

Bit error rate downstream of the Viterbi decoder

PER

Packet error rate

IF AGC Input

Information about the status of the automatic gain control of the monitor 
module

RF Input Level

RF input level in dB

V

Gain Input

Information about the status of the automatic gain control of the monitor 
module