Справочник Пользователя для Rohde & Schwarz Inc SLV8000
Chapter 5
Operating
2100.4400.32
- 5.107 -
E-2
11.6.2
System Setup > Tx Type > Configuration
You can use the System Setup > Tx Type > Configuration and System Setup > Tx Type
> Time Scheduler menu windows to define the rules for a time-controlled switchover be-
tween individual TV standards.
> Time Scheduler menu windows to define the rules for a time-controlled switchover be-
tween individual TV standards.
Using Configuration, when you have selected and specified the TV standards you can
then send them to the time schedule that you intend to configure.
then send them to the time schedule that you intend to configure.
Note
The values for Frequency and Power, unlike corresponding Synthesizer and Output Stage
settings, have priority as soon as the scheduled event is started.
settings, have priority as soon as the scheduled event is started.
11.6.3
System Setup > Tx Type > Time Scheduler
Time Scheduler is used to define switching times for the required switch between TV stan-
dards. Every switchover can be scheduled as an event that takes place once only or daily.
dards. Every switchover can be scheduled as an event that takes place once only or daily.
Column
Description
Tx Std
For selecting the TV standards that have to be taken into account during
time-controlled switchover
time-controlled switchover
Frequency
For setting the transmission frequency for the standard concerned
Power
For setting the output power for the standard concerned