Справочник Пользователя для AVID ID Systems Inc. 125-AV1043-B
<UNIQUE> is a six character unique identifier for the reader. Keep this tag well away from the reader
when reading other tags.
when reading other tags.
Changing AVID Display Format
The reader also comes with another special credit-card sized electronic tag marked “Format Change
Card” that when read by the reader, will change the mode and displayed format of Avid protocol tags.
Card” that when read by the reader, will change the mode and displayed format of Avid protocol tags.
Reading the Format Change Card will cycle the MT3-B display through:
AVID*123*456*789
123*456*789
A123456789
123456789
123*456*789
A123456789
123456789
Future reads of AVID protocol tags will be displayed in the selected format. Display of other tag
protocols will not be affected.
protocols will not be affected.
Keep this tag well away from the reader when reading other tags.
Connecting
If the reader is not in “Off” mode it should connect within a few seconds of being in range and turned
on. If the reader is not already paired with the central device you may have to make the central
device do a scan to look for new peripherals before you see the Avid reader in the peripherals list.
on. If the reader is not already paired with the central device you may have to make the central
device do a scan to look for new peripherals before you see the Avid reader in the peripherals list.
Pairing Overview
The reader must be paired with the central device you'll be using before it can transfer microchip
data. Pairing involves the central device and the reader exchanging some information, so they can
recognize each other in the future. Unless you unpair by going into or through “Off” mode, or have
the central device unpair from the reader, pairing only needs to be done once.
Pairing is done from the central device, and the exact details will depend on the device, and the
operating system it uses.
data. Pairing involves the central device and the reader exchanging some information, so they can
recognize each other in the future. Unless you unpair by going into or through “Off” mode, or have
the central device unpair from the reader, pairing only needs to be done once.
Pairing is done from the central device, and the exact details will depend on the device, and the
operating system it uses.
Bluetooth works by peripherals “advertising” their name and availability. The central device scans to
find what peripherals are present. Turning Bluetooth off and back on again on the central device will
usually start this scan, or the settings page may have a button to cause it to scan.
find what peripherals are present. Turning Bluetooth off and back on again on the central device will
usually start this scan, or the settings page may have a button to cause it to scan.
Advertising mode
Some Bluetooth peripherals use a button to put the peripheral into advertising mode, and the
instructions for pairing that came with your Bluetooth-capable central device may mention this.
The Avid reader doesn't use a button to put it in advertising mode. Unless it is in “Off” mode, the
reader starts advertising as soon as it is turned on.
instructions for pairing that came with your Bluetooth-capable central device may mention this.
The Avid reader doesn't use a button to put it in advertising mode. Unless it is in “Off” mode, the
reader starts advertising as soon as it is turned on.
Copyright 2016 © Avid Identification Systems, Inc.
4
MT3_ Wand Reader with Bluetooth Manual - 4-19-17 AS1
- 4/25/17