Справочник Пользователя для AVID ID Systems Inc. 125-AV1043-B
It will advertise as “Avid UNIQUE”, where UNIQUE is the same string of characters on the reader's
LCD powerup message.
LCD powerup message.
Once your reader is paired with the device, it will show up on the central device's list of Bluetooth
peripherals whether the reader is connected or not.
peripherals whether the reader is connected or not.
Pairing
Go to the Bluetooth settings on the central device where there is a list of detected Bluetooth
peripherals. The reader should show up in the list as Avid UNIQUE, where UNIQUE is the six
characters displayed on the LCD when the reader was turned on.
If the reader ID is not on the list:
peripherals. The reader should show up in the list as Avid UNIQUE, where UNIQUE is the six
characters displayed on the LCD when the reader was turned on.
If the reader ID is not on the list:
- Turn off Bluetooth.
- Turn on the reader
- Turn the Bluetooth back on, and wait for the central device to “discover” the reader.
- Select the reader, and the central device should ask if it is okay to pair with the reader. Allow the
reader to pair.
- Turn the Bluetooth back on, and wait for the central device to “discover” the reader.
- Select the reader, and the central device should ask if it is okay to pair with the reader. Allow the
reader to pair.
Bluetooth devices on the list that are paired and connected are usually shown in slightly different way
than those that aren't. Once a reader is paired with a device, it will show up in the central device's list
of Bluetooth peripherals whether the reader is on and present or not. If the reader is off and you turn it
on, it will connect with the central device in a few seconds.
than those that aren't. Once a reader is paired with a device, it will show up in the central device's list
of Bluetooth peripherals whether the reader is on and present or not. If the reader is off and you turn it
on, it will connect with the central device in a few seconds.
Keyboard Translation Software warning
If the central device uses software that remaps keys from the keyboard, the characters typed by the
reader may not be correct.
reader may not be correct.
WARNING: FOLLOW BATTERY INSTRUCTIONS FOR DISPOSAL.
Operating the Reader Near Metal
Metal objects (especially ferrous metals) absorb electromagnetic fields. Operating the reader
antenna or placing the chip too close to metal object can severely limit the range of operation of the
system. If you are experiencing reduced operating range of your system, check for metal tabletops,
doors, etc. in close proximity (a few inches) to any part of the chip/reader environment.
antenna or placing the chip too close to metal object can severely limit the range of operation of the
system. If you are experiencing reduced operating range of your system, check for metal tabletops,
doors, etc. in close proximity (a few inches) to any part of the chip/reader environment.
Warranty/Service
The AVID Mini Tracker III™ Wand Reader is warranted to be free of manufacturing
defects for a period of one year from the date of purchase. Defective readers will be
repaired or replaced at the discretion of AVID ID Systems. Please contact an AVID
representative for a Return Merchandise Authorization number (RMA) or if you have
any questions.
defects for a period of one year from the date of purchase. Defective readers will be
repaired or replaced at the discretion of AVID ID Systems. Please contact an AVID
representative for a Return Merchandise Authorization number (RMA) or if you have
any questions.
Copyright 2016 © Avid Identification Systems, Inc.
5
MT3_ Wand Reader with Bluetooth Manual - 4-19-17 AS1
- 4/25/17