Справочник Пользователя для Garmin International Inc 02670

Plug the power cable into a power

source.
The status LED is solid red when the

collar is charging.

After the status LED turns solid green,

remove the charging clip from the

collar.

• On the dog collar device, hold the

power key until the status LED turns

green and the collar beeps to turn it on

in training mode.

• On the dog collar device, hold the

power key until the status LED turns

blue to turn on the BarkLimiter feature.

• On the dog collar device, hold the

power key until the status LED turns

yellow to enter pairing mode

(page 5).

On the dog collar device, hold the

power key until the red LED appears.

Release the power key.
The dog collar device beeps to confirm

powering off.
NOTE: If the device is powered off in

BarkLimiter mode, the LED flashes the

number of corrected barks before

powering off .

You can use up to 3 dog collar devices

with a single handheld device.
Each dog collar device must be paired

with the handheld device before it can be

used. During the pairing process, each

dog collar device is associated with a

different color on the handheld device.

NOTE: If your handheld device and dog

collar device were included in the same

package, the devices are paired from the

factory.

Getting Started

5

DRAFT