Garmin International Inc 02670 用户手册
2
Plug the power cable into a power
source.
The status LED is solid red when the
The status LED is solid red when the
collar is charging.
3
After the status LED turns solid green,
remove the charging clip from the
collar.
Turning On the Dog Collar Device
• On the dog collar device, hold the
power key until the status LED turns
green and the collar beeps to turn it on
in training mode.
• On the dog collar device, hold the
power key until the status LED turns
blue to turn on the BarkLimiter feature.
• On the dog collar device, hold the
power key until the status LED turns
yellow to enter pairing mode
(page 5).
Turning Off the Device
1
On the dog collar device, hold the
power key until the red LED appears.
2
Release the power key.
The dog collar device beeps to confirm
The dog collar device beeps to confirm
powering off.
NOTE: If the device is powered off in
NOTE: If the device is powered off in
BarkLimiter mode, the LED flashes the
number of corrected barks before
powering off .
Dog Collar Device
You can use up to 3 dog collar devices
with a single handheld device.
Each dog collar device must be paired
Each dog collar device must be paired
with the handheld device before it can be
used. During the pairing process, each
dog collar device is associated with a
different color on the handheld device.
Pairing a Dog Collar Device with the
Handheld Device
NOTE: If your handheld device and dog
collar device were included in the same
package, the devices are paired from the
factory.
Getting Started
5
DRAFT