Справочник Пользователя для Selex Sistemi Integrati Inc. VOR2
Model 1150A DVOR
3-4
Rev. - November, 2008
This document contains proprietary information and such information may not be disclosed
to others for any purposes without written permission from SELEX Sistemi Integrati Inc.
3.6.3 System Status at a Glance - Sidebar Status and Control
The Sidebar Status and Control is presented on every screen as shown in
The Sidebar Status and Control is presented on every screen as shown in
(Dual Transmitter shown). The
portion of the screen under the “Connected” indication is called the “Sidebar”. The Sidebar presents the current
status of the VOR. The data is refreshed approximately once every two seconds.
At a glance, the technician can determine the state of the VOR. Buttons (point and click with the mouse) are
provided to select Tx1 Main, Tx2 Main, Tx1 Antenna, Tx2 Antenna, Tx1 Load, Tx2 Load, Tx1 Off, Tx2 Off,
Monitor 1 Bypass, and Monitor 2 Bypass. The displayed data originates from either Monitor 1 or Monitor 2,
depending on which transmitter is on the air.
If a DME is collocated with this VOR, its summary level status will also be displayed at the bottom of the Sidebar.
status of the VOR. The data is refreshed approximately once every two seconds.
At a glance, the technician can determine the state of the VOR. Buttons (point and click with the mouse) are
provided to select Tx1 Main, Tx2 Main, Tx1 Antenna, Tx2 Antenna, Tx1 Load, Tx2 Load, Tx1 Off, Tx2 Off,
Monitor 1 Bypass, and Monitor 2 Bypass. The displayed data originates from either Monitor 1 or Monitor 2,
depending on which transmitter is on the air.
If a DME is collocated with this VOR, its summary level status will also be displayed at the bottom of the Sidebar.
Figure 3-1 PMDT Opening Screen with “Sidebar” Data