Справочник Пользователя для B+B SmartWorx WLNG1
Advanced use
49
Configure the server
1.
Select the Server tab.
NOTE:
All IP addresses must be entered using IP address dot notation.
2.
Enter the Primary Server IP address.
3.
Enter the Primary Server Port.
4.
Enter the Alternate Server IP address.
5.
Enter the Alternate Server Port.
6.
Enter the File Server IP address.
7.
Enter the File Server Port.
Design print templates
Use the HP sp400 Series Template Design Software to design print templates for the All-in-One.
1.
Download the HP sp400 Series Template Design Software at
Use the software to lay out dynamic data f
2.
ields and static data and images for your template.
IMPORTANT:
The field name given to a dynamic text field and the field width must match the field
name and width used by the server. The print template name must also match the print template
name used by the server application.
name used by the server application.
3.
Select a dry time print mode setting for your template.
n-One.
elp, see the HP sp400 Series Template Design
4.
Perform a print test if desired.
5.
Save the template on your All-i
NOTE:
For more detailed instructions and h
Software Users Guide. It is available at
Use the default print templates
Four default print templates are already saved on the All-in-One.
ode (where a wireless
ion print template
use with a wireless connection):
There are three non-wireless templates for use in demonstration m
connection is not used):
connection is not used):
○
System informat
○
sp400 Demo print template
○
Pen Diagnostic print template
There is one wireless print template (for
○
sp400 Default (wireless) print template