Справочник Пользователя для B+B SmartWorx WLNG551

27

6. Maximize print quality

for information about solving print problems, see ”

”

Handheld ink is not certified for application to people or animals. Do not intentionally print on any part of a person or animal.

Do not print on food. The ink used in the SP400X is not approved for consumption.

Handheld recommends testing the printed images for readability in your environment and on your material. Improving lighting conditions, 
optimizing font size, increasing the heat and air flow, reducing the humidity of the room, and choosing opaque, light-colored materials can 
all help improve readability of the printed image.

Materials and technique

for best results, do the following when printing:

•  Locate a clean, flat surface near the bar code to print on.

•  Hold the SP400X so that the angle of the device to the surface is approximately 7 degrees.

•  Pull the SP400X in a straight line until the print is complete; do not your rotate wrist or the SP400X during the print.

•  Keep the printer wheel continuously in contact with the print surface while printing.

•  Maintain a relaxed wrist and hand posture and use low force when printing.

•  Maintain a constant speed when printing.

To achieve the best possible readability, consider the following:

•  Magenta prints are easier to see than black prints on tan-colored surfaces like cardboard boxes.

•  Prints on opaque white material show up best.

•  Prints on dark surfaces are not very visible, especially if the surfaces are similar in color.

 Prints on porous materials like cardboard and paper dry instantly, but prints on non-porous materials can take a few moments to dry.

SP400X Series - 6. Maximize print quality