Справочник Пользователя для B+B SmartWorx WLNG551

7. Ensure optimal comfort

Ergonomic recommendations

for optimal results and comfort, follow these ergonomic recommendations:

• The SP400X is designed for scan and print applications. It is not recommended to be worn when performing keyboarding or other

office-related tasks.

• If you experience discomfort, discontinue use of the SP400X and notify your supervisor immediately. If you experience persistent or

recurring pain or discomfort that you think may be related to using the SP400X, you should promptly consult a qualified physician

and, if available, your company’s health and safety department.

• Adjust the SP400X finger strap so it is snug, but not too tight. The wrist strap should have light tension to keep the device against the

knuckles without pressure.

• Maintain a relaxed, neutral posture while using the SP400X. Avoid making a tight fist.

• Select a comfortable print location:

• Print at heights between elbow and shoulder level whenever possible.

• When printing at heights at or below elbow level, printing horizontally is recommended (on the top of the package, for example).

• When printing at heights above elbow level, printing vertically is recommended (on the side of the package, facing you, for example).

• When printing at heights lower than waist level, bending at the knees (not at the waist) is recommended.

• To avoid extended reaches, slide packages close to you before scanning and printing.

• Minimize bending the wrist to position the SP400X. Position hand in a light, relaxed fist when using the SP400X.

• Make a light fist when printing to keep the fingers out of the way and help stabilize the hand around the rudder and finger strap.

• To ensure good quality prints on different types of packages and to ensure comfort, use light pressure to maintain contact with the

package when printing. Applying more force will not improve print quality.

• The SP400X can be worn on the right or left hand and arm. You may alternate wearing the SP400X on the right and left hand and arm.

• When handling boxes, lift with both hands and use good lifting techniques.

• Change your posture during the day by varying your tasks:

• If your job requires standing for long periods, then sit during breaks.

• If your job requires standing in one position, place one foot on a box or a bar to shift your posture.

• If your job requires standing in one position, use an anti-fatigue mat to improve comfort.

• If your job requires you to walk, use cushioned insoles in your shoes to improve comfort.

• If gloves are worn while using the SP400X, ensure they fit properly. The gloves should conform to your fingers and not significantly

bunch under the finger strap. The finger length of the gloves should be as

SP400X Series - 7. Ensure optimal comfort