Справочник Пользователя для Microwave Radio Communications LLC STATXU064T1CK
Routine Operation
3-12
STRATA TX Operator’s Guide/Tech Ref Manual
Figure 3-8: Attaching Quick Release to Tripod
3.
If you have both an TXU and a TCU, be sure they are
connected to each other via coaxial cable.
connected to each other via coaxial cable.
If you are unsure of the connections, refer to the
“Installation” Chapter on page 6-1
(part of the STRATA
TX System Technical Reference Manual only).
4.
Connect the STRATA TXU (and TCU, if present) to DC
power of the correct voltage and polarity.
power of the correct voltage and polarity.
If you’re using a STRATA ACU, connect the AC input
to AC power and connect the DC output to the TXU
and TCU.
to AC power and connect the DC output to the TXU
and TCU.
If you are unsure of the power requirements or the
connections, refer to the
connections, refer to the
“Installation” Chapter on
Quick Release
Tripod
page 6-1
(part of the STRATA TX System Technical
Reference Manual only).
5.
Connect the TXU (or TCU) inputs to your audio and
video equipment.
video equipment.
Figure 3-9: Complete Tripod Installation
3.3.3
Powering the STRATA TX System
The STRATA TX System will be in one of two configurations
which provide different options for controlling application of DC
power between units. Model variations are as follows:
which provide different options for controlling application of DC
power between units. Model variations are as follows:
Universal
Mounting
Brackets
Mounting
Brackets
Antenna
(2 Options
Shown)
(2 Options
Shown)
Quick
Release
Release
TXU
TCU
ACU
Mounting
Plate
Plate
Tripod
(Typical)
(Typical)