Справочник Пользователя для VTech Electronics Limited 1588
4
G
E
T
T
iN
G
ST
ar
T
Ed
Stylus Fastener
Use the stylus string to attach the stylus to this
fastener.
fastener.
Slide these switches to open the battery doors.
Always replace the
Always replace the
InnoTab
®
3S battery doors
after changing batteries.
microSD Memory Card Slot
Insert a microSD memory card (not included).
(NOTE:
(NOTE:
InnoTab
®
3S is compatible with
microSD memory cards up to 32GB.)
Battery Compartments
Insert 4 "AA" batteries or the rechargeable
battery packs. For battery installation
instructions, please see the section below.
battery packs. For battery installation
instructions, please see the section below.
Installing the Rechargeable Battery Packs
1. Make sure the InnoTab® 3 or InnoTab® 3S is turned off.
2. Turn the unit over. Slide the battery door lock switch (or switches) forward
2. Turn the unit over. Slide the battery door lock switch (or switches) forward
and push the battery covers off to each side to remove them.
3. Remove any old batteries that may be in the toy. (Battery removal and
replacement should be done by an adult.)
4. Insert Battery Pack① into the compartment on the right side and Battery
Pack② into the compartment on the left side.
• Insert the battery pack into the connector slot first.
• Then press the battery pack down until it rests in place.
5. Replace the battery covers.
• Then press the battery pack down until it rests in place.
5. Replace the battery covers.
Charging and Recharging the Batteries
The rechargeable batteries should be fully charged before the first use. To charge
and recharge the batteries, please follow the instructions below.
1. Make sure the battery packs are installed in the tablet.
2. Plug one end of the AC adapter into the power jack on the
and recharge the batteries, please follow the instructions below.
1. Make sure the battery packs are installed in the tablet.
2. Plug one end of the AC adapter into the power jack on the
InnoTab
®
and plug
the other end into a wall outlet.
Battery Door Lock Sliding
Switches
Switches