Справочник Пользователя для Tait Limited TMAL3B

The following topics are covered in this section:

■

■

■

■

■

If the red, green and amber LEDs on the control head do not 
light up when the radio is turned on, it is likely that no power 
is reaching the radio. Check the following:

■

Is the power connector firmly plugged into the rear of 
the radio?

■

Are the in-line fuses in good condition?

■

Is the power cable securely connected to the vehicle battery 
or power supply?

If all appears to be in order, then contact your radio provider 
for further assistance.

Using your thumb or forefinger, lift up one 
of the corners of the microphone grommet. 
Firmly (but gently) pull that corner until the 
seal comes away from the cavity.

Repeat to expose another corner.

Pull the exposed corners back and slide the grommet up 
the microphone cable to reveal the microphone plug.

Remove the plug from the microphone socket.

Caution: The microphone grommet must be installed 

whenever the microphone is plugged into the 
microphone socket.

grommet