Справочник Пользователя для Digital Monitoring Products Inc PC0126P

All keypads provide three keypad adjustments the end-user can make through a User Options Menu.  The user can also 

view the keypad model number and address.  
On all keypads press and hold the Back Arrow (<—) and CMD (COMMAND) keys for two seconds to access User Options.  The 

keypad display changes to SET BRIGHTNESS.  Use the COMMAND key to display the next Option or press the Back Arrow to 

exit. 

   Set brightneSS

< 

       

>

Set the keypad LCD Display brightness level, Power and Armed LEDs, and the Green keyboard 

and logo backlighting.  Use the left Select key to lower the brightness and the right Select 

key to raise the brightness.  If the brightness level is lowered, it reverts to maximum intensity 

whenever a key is pressed.  If no keys are pressed, and the speaker has not sounded for 30 

seconds, the user-selected brightness level restores.

 

Set tOne

< 

       

>

Set the keypad internal speaker tone.  At the SET TONE display, use the left Select key to lower 

the tone and the right Select key to raise the tone.  

 Set VOLUMe LeVeL

< 

       

>

Set the keypad internal speaker volume for key presses and entry delay tone conditions.  

During alarm and trouble conditions, the volume is always at maximum level.  Use the left 

Select key to decrease the volume and the right Select key to increase the volume.  

MOdeL nUMber

9060 V100  

The LCD displays the keypad model number and firmware version and date.  The user cannot 

change this information.  

  Keypad addreSS

 

01

The LCD displays the current keypad address.  The user cannot change the keypad address.  

To enter an alpha character, press the key that has the desired letter written below it.  The keypad display shows the 

number on that key. To change the number to a letter, press the top row Select key that corresponds to the letter location 

under the key. For example, if you press key number 1, the letters for that key are A, B, and C. Press the first Select key 

for A, the second Select key for B, the third Select key for C, and the fourth Select key for special characters. 

First Letter

Second Letter

Third Letter

Special Character

(

C

B

A

Each key also has a special, non-alpha character.  These characters are not shown on the keypad.  Enter a space by 

pressing 9 then the third Select key.  The following non-alpha characters are available: ( ) ! ? / & $ ‚ (space) ’ starting with 

the left bracket on the 1 digit key to the blank space and apostrophe on the 9 digit key.  Use the 0 digit key to enter - . * # 

(dash, period, asterisk, or number sign).

1 

2 

3 

4

9 

0 

 

CMD

5 

6 

7 

8

A

(

B

D

)

F

E

G

!

I

H

J

?

L

K

V

,

X

W

S

$

U

T

&

R

Q

M

/

O

N

'

(sp

ac

e)

Z

-

#

*

.