Справочник Пользователя для N. V. Nederlandsche Apparatenfabriek NEDAP ADRRF

Page 

 of 

25

59

Manual iSense Lumen series

If there is any chance that the retailer wants to upgrade an 8.2 MHz RF system to RFID later on,

please take the power requirements for RFID already into account. So instead of having 6 (230 V) or

5 (110 V) units on one Power Inserter - use just 4 (230 V) or 3 (110 V) units on one Power Inserter.

Of course, it is also possible to put less gates units on a Power Inserter.

Make sure the Power Inserter is placed at least 1 m or 3.3 ft. from the gates. When placed closer to

the gate, it might cause interference on the RF technology.

It is recommended that the Power Inserter is connected to an always-on power socket. This allows

continuous monitoring of the system, and remote firmware update during the night.