Справочник Пользователя для Sennheiser Electronic Corp CBBDBA
8
En
glish
glish
Type 2:
Connecting the base station to a usual
fixed line phone
Connecting the base station to a usual
fixed line phone
왘
Disconnect the handset from your
fixed line phone, but leave it on the
phone.
fixed line phone, but leave it on the
phone.
왘
Plug the free handset cable connector
to the base station HANDSET
socket
to the base station HANDSET
socket
쐅
.
왘
Connect the cable which is already
connected to the base station
(PHONE socket
connected to the base station
(PHONE socket
쐈
) to the fixed line
phone socket where the handset
cable was connected before.
cable was connected before.
To test the phone connection:
왘
Pick up the handset.
If the dial tone is heard in the hand-
set, the system is connected properly.
If no dial tone is heard, please refer to
“Adjusting to your fixed line phone”
on page 12.
If the dial tone is heard in the hand-
set, the system is connected properly.
If no dial tone is heard, please refer to
“Adjusting to your fixed line phone”
on page 12.
Type 3:
Connecting the base station to a fixed
lined DHSG phone
Connecting the base station to a fixed
lined DHSG phone
왘
Connect the accessory cable (RJ 45
DHSG cable, not included) to the
AUX/DHSG socket
DHSG cable, not included) to the
AUX/DHSG socket
씈
and to the DHSG
phone.
To test the phone connection:
왘
Make sure the base station AUX
LED
LED
쐄
is on. If not:
Press the AUX button
쐏
(
).
The AUX LED
쐄
is on now.
왘
Put on the headset.
왘
On the headset, press the hook
button
button
햶
.
If the dial tone is heard in the hand-
set, the system is connected properly.
If no dial tone is heard, please refer to
“Adjusting to your fixed line phone”
on page 12.
set, the system is connected properly.
If no dial tone is heard, please refer to
“Adjusting to your fixed line phone”
on page 12.
쐅
쐈
To connect special phones
with call control please ask
your service partner.
with call control please ask
your service partner.
씈