Справочник Пользователя для Sennheiser Electronic Corp CBBDBA
9
En
gl
ish
Connecting the base station to
a computer
a computer
For multimedia purposes or voice over IP
(internet telephony) you can connect
the VMX OFFICE system to a computer.
There are two ways to connect to a
computer:
(internet telephony) you can connect
the VMX OFFICE system to a computer.
There are two ways to connect to a
computer:
1. If your computer features a Bluetooth
interface, you can connect the
headset directly via Bluetooth as
described in “Pairing to other Blue-
tooth devices” on page 14. In this
case you do not require the base
station for VoIP.
headset directly via Bluetooth as
described in “Pairing to other Blue-
tooth devices” on page 14. In this
case you do not require the base
station for VoIP.
2. Connecting the Base Station:
– either to two 3.5 mm jack sockets
of a usual sound card
– or via UUSB 7 to a special sound
card
– or via USB. This is the only connec-
tion that allows to make and
accept calls with a mouse-click, i.e.
without having to press any button
(this requires a VoIP call control
software).
accept calls with a mouse-click, i.e.
without having to press any button
(this requires a VoIP call control
software).
Connecting the base station to the
headphone output and the microphone
input socket of a computer sound card
headphone output and the microphone
input socket of a computer sound card
왘
Connect the RJ 9 plug of the acces-
sory cable (not included):
sory cable (not included):
– to the AUX/DHSG socket
씈
if you
use a usual fixed line phone or no
phone at all
phone at all
– to the PHONE socket
쐈
if you use a
DHSG phone
왘
Connect the cable with 3.5 mm jack
plugs to the RJ 45 plug of the acces-
sory cable (not included).
plugs to the RJ 45 plug of the acces-
sory cable (not included).
왘
Connect the 3.5 mm jack plugs to the
green headphone output socket and
the red microphone input socket
green headphone output socket and
the red microphone input socket
To test the PC connection:
왘
Make sure the base station AUX
LED
LED
쐄
is on. If not:
Press the AUX button
쐏
(
).
The AUX LED
쐄
is on now.
왘
Put on the headset.
왘
Play a sound file on the PC.
왘
On the headset, press the hook
button
button
햶
.
If the sound file is heard in the head-
set, the system is connected properly.
If no sound file is heard, please refer
to “Adjusting to your fixed line
phone” on page 12.
set, the system is connected properly.
If no sound file is heard, please refer
to “Adjusting to your fixed line
phone” on page 12.
씈
쐈
Before testing make sure
the PC works accordingly.
the PC works accordingly.