Справочник Пользователя для Sennheiser Electronic Corp G3SKMEM
21
Cleaning the radio microphone
Cleaning the radio microphone
Use a slightly damp cloth to clean the radio microphone from time to
time. Do not use any solvents or cleansing agents.
time. Do not use any solvents or cleansing agents.
To clean the sound inlet basket of the microphone head (MMD 835-1,
MMD 845-1, MMD 935-1, MMD 945-1, MME 865-1):
MMD 845-1, MMD 935-1, MMD 945-1, MME 865-1):
Unscrew the upper sound inlet basket from the microphone head by
turning it counterclockwise (see diagram).
turning it counterclockwise (see diagram).
Remove the foam insert.
To clean the sound inlet basket:
– Use a slightly damp cloth to clean the upper sound inlet basket from
the inside and outside.
OR
OR
– Scrub with a brush and rinse with clear water.
If necessary, clean the foam insert with a mild detergent or replace the
foam insert.
foam insert.
Dry the upper sound inlet basket.
Dry the foam insert.
Reinsert the foam insert.
Replace the sound inlet basket on the microphone head and screw it
tight.
tight.
You should also clean the contact rings of the microphone head from time
to time:
to time:
Wipe the contact rings of the microphone head with a dry cloth.
CAUTION!
Liquids can damage the electronics of the radio
microphone!
microphone!
Liquids entering the housing of the device can cause a
short-circuit and damage the electronics.
short-circuit and damage the electronics.
Keep all liquids away from the radio microphone.
CAUTION!
Liquids will damage the microphone module!
Liquids will damage the microphone module.
Only clean the upper sound inlet basket.
For information on cleaning the MMK 965-1 microphone head,
refer to its instruction manual.
refer to its instruction manual.
ew G3 SKM 500_529673_0109_SP8_PRT.book Seite 21 Dienstag, 10. Februar 2009 11:20 11