Справочник Пользователя для Sennheiser Electronic Corp G3SKMEM
20
Adjustment tips
Adjustment tips
Synchronizing the radio microphone with a receiver
When synchronizing the radio microphone with a receiver, please observe
the following:
the following:
Only use a radio microphone and a receiver from the same frequency
range (see the type plate on the radio microphone and the receiver).
range (see the type plate on the radio microphone and the receiver).
Make sure that the desired frequencies are listed in the enclosed
frequency information sheet.
frequency information sheet.
Make sure that the desired frequencies are approved and legal in your
country and, if necessary, apply for an operating license.
country and, if necessary, apply for an operating license.
Synchronizing the radio microphone with the receiver –
individual operation
individual operation
Upon delivery, the radio microphone and the receiver are synchronized
with each other. However, if you cannot establish a transmission link
between radio microphone and receiver, you have to synchronize the
channels of the devices.
with each other. However, if you cannot establish a transmission link
between radio microphone and receiver, you have to synchronize the
channels of the devices.
For information on automatic synchronization of the radio microphone
with the receiver (individual operation), refer to the instruction manual of
the receiver. This information is marked with the
with the receiver (individual operation), refer to the instruction manual of
the receiver. This information is marked with the
icon.
Alternatively, you can set the channel on the radio microphone manually:
Make sure that you set the radio microphone to the same frequency
bank and the same channel as the receiver (see page 16).
bank and the same channel as the receiver (see page 16).
If you still cannot establish a transmission link, refer to the chapter “If a
problem occurs ...” on page 22.
problem occurs ...” on page 22.
Synchronizing radio microphones with receivers –
multi-channel operation
multi-channel operation
Combined with ew 500 G3 receivers, ew 500 G3 radio microphones can
form transmission links that can be used in multi-channel systems. In
order to ensure an intermodulation-free transmission, use the same
frequency bank for all transmission links.
form transmission links that can be used in multi-channel systems. In
order to ensure an intermodulation-free transmission, use the same
frequency bank for all transmission links.
For information on automatic synchronization of radio microphones with
receivers (multi-channel operation), refer to the instruction manual of
your receiver. For more information on multi-channel operation, visit the
SKM 500 G3 product page at www.sennheiser.com.
receivers (multi-channel operation), refer to the instruction manual of
your receiver. For more information on multi-channel operation, visit the
SKM 500 G3 product page at www.sennheiser.com.
ew G3 SKM 500_529673_0109_SP8_PRT.book Seite 20 Dienstag, 10. Februar 2009 11:20 11