Справочник Пользователя для Sony Corporation ZTXM01
E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm
masterpage:Right
DWZ-M50/B30GB
4-445-504-11 (1)
33
Receiver Settings
5
Select [Set].
The setting value is saved.
To cancel the setting, press the ESC
button.
To cancel the setting, press the ESC
button.
Configuring the transmitter
muting function for the
UNBALANCED OUTPUT
TUNER/AUX connector
muting function for the
UNBALANCED OUTPUT
TUNER/AUX connector
You can select whether the muting function
of the transmitter will be applied to the
audio output of the UNBALANCED
OUTPUT TUNER/AUX (external audio
output) connector.
of the transmitter will be applied to the
audio output of the UNBALANCED
OUTPUT TUNER/AUX (external audio
output) connector.
The audio output from the UNBALANCED
OUTPUT TUNER/AUX connector will
continue, even if the muting function of the
transmitter is enabled. To disable the audio
output from the UNBALANCED OUTPUT
TUNER/AUX connector, enable the TX
Muting function.
OUTPUT TUNER/AUX connector will
continue, even if the muting function of the
transmitter is enabled. To disable the audio
output from the UNBALANCED OUTPUT
TUNER/AUX connector, enable the TX
Muting function.
1
In the [Setup] screen, select [Audio
Setup].
Setup].
The [Audio Setup] screen appears.
2
Select [AUX/Tuner Out Settings].
The [AUX/Tuner Out Settings] screen
appears.
appears.
3
Select whether to enable the muting
function.
function.
TX Muting Valid: Enables the TX
Muting function. The audio output
from the connector is disabled when
the muting function of the transmitter
is enabled.
TX Muting Invalid: Disables the TX
Muting function. The audio out put
from the connector will continue,
Muting function. The audio output
from the connector is disabled when
the muting function of the transmitter
is enabled.
TX Muting Invalid: Disables the TX
Muting function. The audio out put
from the connector will continue,
regardless of whether the muting
function of the transmitter is enabled
or disabled.
function of the transmitter is enabled
or disabled.
This completes the configuration, and
the main screen appears again.
the main screen appears again.
Configuring the battery type
Specify the type of battery that is being used
in the transmitter so that the transmitter’s
remaining battery charge can be displayed
properly on this unit.
in the transmitter so that the transmitter’s
remaining battery charge can be displayed
properly on this unit.
1
In the [Setup] screen, select [Advanced
Settings].
Settings].
2
Select [Battery Type].
3
Select the battery type.
Alkaline: Alkaline dry cell batteries
are being used in the transmitter.
Ni-MH: Rechargeable nickel-metal
hydride batteries are being used in the
transmitter.
Lithium: Lithium batteries are being
used in the transmitter.
are being used in the transmitter.
Ni-MH: Rechargeable nickel-metal
hydride batteries are being used in the
transmitter.
Lithium: Lithium batteries are being
used in the transmitter.
This completes the configuration, and
the main screen appears again.
the main screen appears again.
Compact Receiver (ZRX-
C30)
C30)
Configuring the RF mode and
receiving channel
receiving channel
Two RF modes (channel modes), wide band
and narrow band, are available on the
DWZ.
Each RF mode consists of six channels.
Select the appropriate channel according to
your intended use.
and narrow band, are available on the
DWZ.
Each RF mode consists of six channels.
Select the appropriate channel according to
your intended use.
Caution
00DWZ.book Page 33 Wednesday, August 15, 2012 3:38 PM