Справочник Пользователя для Sony Corporation ZTXM01
E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504121_GB\4445504121
\4445504121DWZM50UC\01GB04BAS.fm
M50_B30GB\120800937_4445504121_GB\4445504121
\4445504121DWZM50UC\01GB04BAS.fm
masterpage:Right
DWZ-M50/B30GB
4-445-504-12 (1)
35
Transmitter Settings
Transmitter
Settings
Settings
Configuring the
Transmitting Channel
Settings
Transmitting Channel
Settings
Two RF modes (channel modes), wide band
and narrow band, are available on the
DWZ.
Each RF mode consists of six channels.
Select the appropriate channel according to
your intended use.
and narrow band, are available on the
DWZ.
Each RF mode consists of six channels.
Select the appropriate channel according to
your intended use.
When using multiple channels (up to six),
the two RF modes, wide band and narrow
the two RF modes, wide band and narrow
band, cannot be used simultaneously. Select
only one RF mode during use.
only one RF mode during use.
Selecting the RF mode
1
Press and hold the POWER/MUTING
button to turn off the unit.
button to turn off the unit.
2
Press and hold the POWER/MUTING
button (about 1 second) while holding
down the channel selection button.
button (about 1 second) while holding
down the channel selection button.
“0” blinks in the channel display.
3
Press the channel selection button to
select “1” or “a.”
select “1” or “a.”
4
Press the POWER/MUTING button.
Selecting the channel
1
Press and hold the channel selection
button while the unit is turned on.
button while the unit is turned on.
The channel display blinks.
2
Press the channel selection button to
select the channel.
select the channel.
3
Press and hold the channel selection
button to apply the channel selection.
button to apply the channel selection.
If you change the channel setting on the
transmitter, be sure to change the channel
setting on the receiver to the same channel.
If the receiver channel and transmitter
channel are not identical, audio will not be
output.
transmitter, be sure to change the channel
setting on the receiver to the same channel.
If the receiver channel and transmitter
channel are not identical, audio will not be
output.
Channel Display
Each channel will appear as follows in the
transmitter’s channel display.
transmitter’s channel display.
RF mode
Transmitting
channel
number
channel
number
Description
Wide band
(WIDE)
(WIDE)
1/2/3/4/5/6
This mode
reduces any
interference
to other
wireless
equipment.
reduces any
interference
to other
wireless
equipment.
Narrow
band
(NARROW)
band
(NARROW)
a/b/c/d/e/f
This mode
uses the
Clear
Channel
Scan
function,
making it
useful for
avoiding
any
interference
from other
wireless
equipment.
uses the
Clear
Channel
Scan
function,
making it
useful for
avoiding
any
interference
from other
wireless
equipment.
Caution
Caution
00DWZ.book Page 35 Saturday, August 25, 2012 6:24 PM