Справочник Пользователя для Brother Industries Ltd. 8CAE19
134
Copying Difficulties
Difficulty
Suggestions
Cannot make a copy.
Make sure that the Copy
key is illuminated. (See Entering Copy
mode on page 86.)
Vertical streaks appear in copies.
If you see vertical streaks on copies, clean the scanner. (See Cleaning the scanner on page 147.)
Poor copy results when using the
ADF.
ADF.
Try using the scanner glass. (See Using the scanner glass on page 11.)
Vertical black line appear in copies. Black vertical lines on copies are typically caused by dirt or correction fluid on the
glass strip. Clean the glass strip. (See Cleaning the scanner on page 147.)
Scanning Difficulties
Difficulty
Suggestions
TWAIN/WIA errors appear when
starting to scan.
starting to scan.
Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In
PaperPort
PaperPort
®
11SE with OCR, click File, Scan and choose the Brother TWAIN/WIA
driver.
Poor scanning results when using
the ADF.
the ADF.
Try using the scanner glass. (See Using the scanner glass on page 11.)
Software Difficulties
Difficulty
Suggestions
Cannot install software or print.
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
and reinstall the software.
‘Device Busy’
Make sure the machine is not showing an error message on the LCD.
Cannot print images from
FaceFilter Studio.
FaceFilter Studio.
To use FaceFilter Studio, you must install the FaceFilter Studio application from
the CD-ROM supplied with your machine. To install FaceFilter Studio see the
Quick Setup Guide.
the CD-ROM supplied with your machine. To install FaceFilter Studio see the
Quick Setup Guide.
Also, before you start FaceFilter Studio for the first time, you must make sure your
Brother machine is turned On, and connected to your computer. This will allow you
to access all the functions of FaceFilter Studio.
Brother machine is turned On, and connected to your computer. This will allow you
to access all the functions of FaceFilter Studio.