Справочник Пользователя для Nautel Maine Inc VS300
VS300 Operations and Maintenance Manual
Non-standard maintenance
Page 4-2
Issue 0.1 2011-03-11
Transferring upgrade file
The following steps assume either the laptop will be used to connect directly to the transmitter OR
the transmitter and network computer are currently connected to the same network.
the transmitter and network computer are currently connected to the same network.
Transmitter IP configuration
1. From the transmitter AUI, go to
Menu
/
Software
/
Network Setup
.
2. Record your current network settings (IP Address, Subnet Mask, Default Gateway).
3. If connecting to the transmitter directly with a laptop, you must set a static IP address. This
can only be done via the front panel interface. From the front panel UI’s
Main Menu
, go to
User Settings
/
Network Settings
and set the IP address as follows:
– DHCP: OFF
– IP Address: 10.10.10.2
– Netmask: 255.255.255.0
– IP Address: 10.10.10.2
– Netmask: 255.255.255.0
4. Set the transmitter for
Remote
control.
Laptop IP setup
The following steps assume the operating system is Windows XP. Adapt as required for computers
with different operating systems.
with different operating systems.
1. On the laptop go to
Start Menu
/
Control Panel
/
Network Connections
/
Local Area
Network
.
2. In the Local Area Network Status, open the
General
tab and choose
Properties
. Scroll
down and highlight
Internet Protocol (TCP/IP)
. Choose
Properties
.
3. In the Internet Protocol (TCP/IP) Properties window, select
Use the following IP address
.
4. Enter the following settings:
– IP Address: 10.10.10.1
– Subnet Mask: 255.255.255.0
– Default Gateway: 192.168.1.2
– Subnet Mask: 255.255.255.0
– Default Gateway: 192.168.1.2
5. In the Internet Protocol (TCP/IP) Properties window, select
OK
.
6. In the Local Area Connection Properties window, select
OK
.