Справочник Пользователя для UTC Fire & Security Americas Corporation Inc 855-NODE
1
,QVWDOODWLRQ,QVWUXFWLRQV
*(,QWHUORJL[
'
Product
Summary
Summary
The Node Repeater reduces wireless traffic and extends the range of GE Interlogix wireless sys-
tems. It receives signals from GE Interlogix 319.5MHz sensors, then retransmits them if neces-
sary. The Node Repeater incorporates a 900MHz transmitter for increased range.
tems. It receives signals from GE Interlogix 319.5MHz sensors, then retransmits them if neces-
sary. The Node Repeater incorporates a 900MHz transmitter for increased range.
The Repeater allows enrollment of up to 128 sensors. Only enrolled sensors are monitored and
repeated. Sensors are enrolled into the Node Repeater using either a personal computer interface
or a pair of on-board DIP switches.
repeated. Sensors are enrolled into the Node Repeater using either a personal computer interface
or a pair of on-board DIP switches.
Power is supplied to the Node Repeater via a 16.5VAC Class 2 transformer. A 12V lead acid
battery provides backup power.
battery provides backup power.
Repeater Features:
•
Regular supervisory reports to the panel
•
A tamper switch that causes an alarm transmission if the cover is removed.
•
A tamper switch that causes an alarm transmission if the unit is removed from the
•
wall.
•
Antenna tamper monitoring, causing an alarm transmission if the antennas are cut.
•
Dual receive antennas, which provides improved reception through spatial
•
diversity.
•
Receiver jam detection, with an alarm transmission if jam is detected.
•
Sensor enrollment using either a PC or DIP switch interface.
•
Support for a rechargeable lead acid backup battery.
•
Battery monitoring, with an alarm transmission if the battery is low.
•
AC power monitoring, with an alarm transmission if the power has failed for
•
more than 15 minutes.
•
Encryption of sensitive data.
Compatibility
•
All GE Interlogix 80-bit sensors at 319.5MHz
•
GE Interlogix Learn Mode panic sensors at 319.5MHz
Tools and Accessories Needed
Included with Repeater
•
• Mounting screws and anchors
•
• Antenna shrouds
•
• Battery cables
•
• Multi-Purpose Housing (60-928)
Not Included with Repeater
•
• Phillips screwdriver
•
• Small standard screwdriver
•
• 2-conductor, 12–18 gauge, stranded wire
•
• Backup battery (optional) such as the Panasonic LCD 12V1.3P rechargeable battery
•
• RF Sniffer (60-401, optional)
0RGHO1R;;;
'RFXPHQW1XPEHU;;5HY$
-XO\
PRELIMINARY 7/24/03
4XLN%ULGJH1RGHUHSHDWHU