Справочник Пользователя для Andrew Wireless Innovations Group RPT-NODEC1943

4 Commissioning 

 

ID No: 161692 

PRELIMINARY 

Page 27

 

 
The USB adapter and the driver CD are located inside the Interface Unit: 
 

 

 

 
When the USB adapter is connected to a PC for the first time, the USB driver must 
be installed. The Node C and Interface Unit must be switched on for the procedure. 
To install the driver, proceed as follows: 

•  Connect the USB cable of the USB adapter to the USB port of the PC. 
•  Then, wait until the system (valid from Windows98ME) delivers the message that 

a new USB device was found and asks for the driver. 

•  Put the CD into the CD-ROM drive of the PC and the system will ask how to 

search for the driver. 

•  Select the automatic search (usually default), confirm, and wait while the system 

searches for the driver. 

•  The successful installation will be informed by a message that the new hardware 

was successfully installed. 

•  After confirming this message the CD can be taken out of the drive and put back 

into the plastic cover inside the Interface Unit. 

•  Reboot the PC.  
 
When the connection is made the next time, this procedure is no longer necessary. 

USB adapter 
with USB 
cable 

Driver CD 

RS232 connector for USB or 
null modem cable connection 

Position of 
optional 
modem