Справочник Пользователя для Mitsubishi Electric Corp 485
8
Note
A point to notice
Info.
Supplementary information
Basic Functions
Playback
1. Turn on the VCR and peripheral devices.
2. Load a pre-recorded tape.
3. Press the MODE button to select the desired
playback mode.
4. Press the PLAY/STOP button to start playback.
•
If noise occurs during playback, adjust the
tracking,
tracking,
page 17.
5. Press the PLAY/STOP button again to stop
playback.
When the tape reaches its end during playback/fast forwarding
VCR’s function varies by the setting of TAPE END in the FIRST TIME SET UP menu.
Rewinding a tape
While the tape is stopped, turn the SHUTTLE ring to the left.
To stop rewinding, press the PLAY/STOP button on the front panel.
Fast-forwarding a tape
While the tape is stopped, turn the SHUTTLE ring to the right.
To stop fast-forwarding, press the PLAY/STOP button on the front panel.
Audio playback and picture quality
2H/8H
Playback mode
Audio
playback
Very
good
Picture
Quality
L40H
L24H
Good
Good
Good
Good
Very
good
VCR’s function
Fast
Forward
Playback
TAPE END
setting
STOP or REWIND
REPEAT or
ALARM•PROT
Stop
VCR automatically rewinds
to the beginning of the tape
and stops.
to the beginning of the tape
and stops.
Stop
Stop
Info.
•
The VCR automatically plays back the
tape on which the erasure prevention
tab has been removed, AUTO PLAY.
tape on which the erasure prevention
tab has been removed, AUTO PLAY.
Note
•
Playback mode
When the MODE button is pressed,
the playback mode is switched in the
order of 8H
When the MODE button is pressed,
the playback mode is switched in the
order of 8H
L24H
L40H
8H
... (for a tape recorded in 8H, L24H or
L40H mode).
–
L40H mode).
–
A tape recorded in SP mode using
an other VCR can only be played
back in 2H mode.
an other VCR can only be played
back in 2H mode.
•
Picture jitter or noise may occur when
the tape is played back in L24H or
L40H mode even if the tape was
recorded in its respective mode.
the tape is played back in L24H or
L40H mode even if the tape was
recorded in its respective mode.
•
When a pre-recorded tape is used for
recording, the colored noise may
appear on the beginning of the
playback picture.
recording, the colored noise may
appear on the beginning of the
playback picture.
•
There is normal sound playback only
when a tape recorded in 8H, L24H, or
L40H mode is played back in its
respective mode.
when a tape recorded in 8H, L24H, or
L40H mode is played back in its
respective mode.
•
To find a picture you wish to view, go
to page 18.
to page 18.
•
For TAPE END setting, go to page 29.
Note
•
The fast-forward/rewind time of a T-
160 tape is approximately 120
seconds; however, the time varies by
the type of tape you use.
160 tape is approximately 120
seconds; however, the time varies by
the type of tape you use.
MODE
STOP
PLAY