Справочник Пользователя для Zhejiang Flashforge 3D Technology CO. Ltd. GUIDERII
GuiderⅡ User Guide | www.flashforge.com
0086-0579-82273989
64
7.2.3 Print from USB Flash Disk
①
Insert your USB flash disk with target .g or .gx file to your GuiderⅡ. .
②
Turn on the GuiderⅡ. Make sure the build plate has been leveled and the filament
is loaded.
③
Tap
[Print]
and then tap the
SD Card
icon in the middle. The file(s) will be
displayed on the screen. Select the file you want to print and tap
[Print]
. The file will
be transferred to the printer.
⑥
And the printer will heat up the nozzle automatically and start to print after the
nozzle reaches the aimed temperature.,
Abort:To stop heating and printing. Once you tap [Abort], the process is irreversible.
Pause:To suspend the print job, you can tap it again to resume it. You can use this
function when you want to change the filament halfway.
function when you want to change the filament halfway.
7-11