Справочник Пользователя для Polygroup Trading Limited 1701
ASSEMBLY INSTRUCTIONS
MADE IN CHINA
7
Storage Instructions
7.1 IMPORTANT: Remove all ornaments and decorations.
7.2 Set the Grow and Stow tree to its minimum size. (fig 6)
7.3 Detach the AC power cord from AC outlet, and put all accessories
parts into the accessories stow pouch .
7.4 Collect all wires, controllers and accessories inside the stow pouch.
And attach it to the trunk near wheel stand . (Recommended)
7.5 Remove the tree top section from top funnel guide. Fold all
branches towards the pole and stow it inside the tree top bag .
7.6 Gently fold up main section branches if needed.
7.7 Place the main tree bag around the tree main section, warping
the tree from top to bottom. Zip it until fully closed.
7.8 Cinch tight the nylon rope on the bottom side of the main tree bag, the
strap will hold its position once you release the spring clamp.
7.9 Buckle the straps until you hear a firm click. Then cinch the straps tightly by pulling at the end of the
loose strap.
7.10 When not in use, store the tree in a cool, dry place away from sunlight. Exposing the tree to
excessive heat or humidity may damage the tree.
Fig 6
REPLACEMENT PARTS ORDERING INFORMATION
No
DESCRIPTION
Drawing
No.
PART No.
qty
1
AC power cord
1
x1
2
AC/DC adaptor
2
x1
3
Rolling wheel tree stand
8
x1
4
quick set funnel
12
x1
5
Tree head section
14
x1
6
Foot Pedal unit
15
x1
7
Remote control handset
22
x1
8
Tree bag - Accessories (small)
28
x1
9
Tree bag - tree head
29
x1
10
Tree bag - tree Main
30
x1
11
hinge pins and washers
x1
12
LED light bulb
?
Fig. 7
SPARE PARTS ?
hinge pins and washers
LED light bulb
LED light bulb
1
8
14
29
30
28