Справочник Пользователя для Arlo Technologies Inc. 18200352
60
10. Troubleshooting
Check Arlo Go’s LTE Signal Strength
¾ To check your Arlo Go’s LTE signal strength:
1. Tap
the
Arlo icon
on your mobile device.
You can also enter
arlo.netgear.com
in the address bar of a browser.
The Devices page displays.
2. Find your Arlo Go camera.
3. Tap or click Settings.
4. Scroll down to the NETWORK section.
AT&T signal strength displays in this section.
5. If your camera has 0, 1, or 2 bars of LTE signal strength, consider moving your
Arlo Go camera to a location with better signal strength.
If your camera normally has at least three bars of signal strength, bad weather
or heavy LTE network usage might be weakening your camera’s LTE connection.
Wait 30-60 minutes and check again to see if coverage improves. If coverage is
consistently bad for two or more days, consider moving your Arlo Go camera to
a location with better signal strength.
or heavy LTE network usage might be weakening your camera’s LTE connection.
Wait 30-60 minutes and check again to see if coverage improves. If coverage is
consistently bad for two or more days, consider moving your Arlo Go camera to
a location with better signal strength.
Check Arlo Go’s Battery Level
¾ To check your Arlo Go’s battery level:
1. Tap
the
Arlo icon
on your mobile device.
You can also enter
arlo.netgear.com
in the address bar of a browser.
The Devices page displays.
2. Find your Arlo Go camera.
If the battery icon is yellow or red, recharge your Arlo Go camera’s battery or
insert a fully charged battery.
insert a fully charged battery.
If the battery icon is black, the battery level is not low enough to cause
streaming problems.
streaming problems.
DRAFT
60
60