Справочник Пользователя для RadioShack Corporation 400268T
10
S
e
tu
p
w
Caution:
Do not connect the transmitter to your audio source’s speaker output. It could
damage the transmitter and the audio source.
If you connected the transmitter to an audio source’s headphone jack, set the
If you connected the transmitter to an audio source’s headphone jack, set the
audio source’s volume control to its middle position.
5
Stereo/�ono setup
For normal stereo use, set STEREO/
MONO on the back of the transmitter
MONO on the back of the transmitter
to STEREO. If you are using a monaural
system, set STEREO/MONO to
MONO.
MONO.
If you select STEREO:
Set SPEAKER on the back of each speaker
Set SPEAKER on the back of each speaker
to either L (for the Left stereo speaker) or
R (for the Right stereo speaker).
R (for the Right stereo speaker).
6
Select channel
1.
Set the transmitter to a frequency channel (CHANNEL 1, 2, or 3) that has no
interference.
.
Set the speaker to the same channels as the transmitter.
n
Note: If you receive interference, try changing the channel number on the
transmitter and the speakers.