Справочник Пользователя для RadioShack Corporation 400268T

  Turn on your audio source.

The transmitter has a built-in automatic ON/OFF controller. When the AC 

adapter is plugged in and the transmitter receives audio signals from the audio 

source, the transmitter’s power LED lights blue. The transmission stops if the 

transmitter does not receive audio signals from the audio source for about one 

minute. The transmitter’s power LED turns off.

  Rotate VOLUME to ON to turn on your 

speakers. The power indicator lights blue.

. The power indicator lights blue.

The power indicator lights blue.

  Adjust TREBLE and BASS on each speaker 

between – (minimum) to + (maximum) to a 

desired level.

  To turn off each speaker, rotate VOLUME to 

OFF. The power indicator turns off.

To mount a speaker on the wall, you need two screws (not supplied) with a head 

that fits into the keyhole slot on the back of the speaker.

  Select a location and drill a hole to fit your screws.

  Thread each screw into the hole until the screw’s head extends about 

3

/

5

 inch 

(15mm) from the wall.

  Align the keyhole on the speaker with the screw head in the wall, then slide 

the speaker down gently to secure it.