Справочник Пользователя для RadioShack Corporation 400268T
1
Basic Oper
ation
Basic Operation
Turn on
1.
Turn on your audio source.
The transmitter has a built-in automatic ON/OFF controller. When the AC
adapter is plugged in and the transmitter receives audio signals from the audio
source, the transmitter’s power LED lights blue. The transmission stops if the
transmitter does not receive audio signals from the audio source for about one
minute. The transmitter’s power LED turns off.
.
Rotate VOLUME to ON to turn on your
speakers. The power indicator lights blue.
. The power indicator lights blue.
The power indicator lights blue.
.
Adjust TREBLE and BASS on each speaker
between – (minimum) to + (maximum) to a
desired level.
4.
To turn off each speaker, rotate VOLUME to
OFF. The power indicator turns off.
7
Mount the speakers
To mount a speaker on the wall, you need two screws (not supplied) with a head
that fits into the keyhole slot on the back of the speaker.
1.
Select a location and drill a hole to fit your screws.
.
Thread each screw into the hole until the screw’s head extends about
3
/
5
inch
(15mm) from the wall.
.
Align the keyhole on the speaker with the screw head in the wall, then slide
the speaker down gently to secure it.