Справочник Пользователя для Mobileye Technology Ltd. MOB005
Technical Support
Mobileye 5 – Technical Installation Guide_Rev 0.1
Nov, 2011
Page 15 of 38
Mobileye Proprietary and Confidential
support@mobileye.com
Unit on the rear view mirror or place it on the dashboard before passing the
cable behind the vehicle trimmings).
cable behind the vehicle trimmings).
3. Firmly connect the appropriate wire from the Mobileye 5 (CAB000105) to the
identified vehicle signal.
Each wire in the Mobileye 5 cable mentioned above has a unique color.
Make sure to connect the correct vehicle signal to its appropriate wire
according to Table 2-7.
Make sure to connect the correct vehicle signal to its appropriate wire
according to Table 2-7.
Identified vehicle signal
Wire label
Wire color
Vehicle battery (Constant 12V~24V) via 2A Fuse
BAT+
Red
Ignition (12V~24V)
Ignition
Blue
Vehicle GND
GND
Black
CAN High
CAN High
White
CAN low
CAN low
Yellow
NOTE: Make sure the 2A fuse is kept easily accessible
NOTE: Wires’ colors are not guaranteed. Always refer to the wires’ labels
NOTE: Always check the Mobileye Internal Database for CAN-Bus availability before
installation is started
NOTE: Wires’ colors are not guaranteed. Always refer to the wires’ labels
NOTE: Always check the Mobileye Internal Database for CAN-Bus availability before
installation is started
4. Keep the Mobileye 5 EyeCAN and EyeWatch connectors easily accessible.
3.2.3 Installing the EyeWatch (optional)
1. Select the optimal location for the EyeWatch. The unit should be placed on
the dashboard at a location which is in the driver's field of view and
convenient for him to see when driving, and to allow him access to the
controls while seating comfortably in the driver's seat (the EyeWatch
mounting angle is adjustable by the installer, a Philips screw driver is
required).
convenient for him to see when driving, and to allow him access to the
controls while seating comfortably in the driver's seat (the EyeWatch
mounting angle is adjustable by the installer, a Philips screw driver is
required).
2. Clean the selected location with the provided 3M VHB Surface cleaner.
3. Attach the EyeWatch to the selected area (remove the protective cover from
the adhesive tape).
4. Remove transparent protecting cover from the display surface