Справочник Пользователя для ICOM 272102
11
4
PASSPORT OPERATION
■ Transmitting a call
D Group call
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group in
which the group ID is pre-programmed.
which the group ID is pre-programmed.
w While pushing and holding [PTT], speak into the micro-
phone at a normal voice level after a beep is emitted.
• If an error beep is emitted, release [PTT]. After a while, repeat
step w again.
• The beep can be turned OFF in User set mode.
• When the transceiver is out of the communication area, “
”
disappears, and “NO SVC” message appears.
D Individual call
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group in
which the MID (Mobile ID) is pre-programmed.
which the MID (Mobile ID) is pre-programmed.
w While pushing and holding [PTT], speak into the micro-
phone at a normal voice level after a beep is emitted.
• If an error beep is emitted, release [PTT]. After a while, repeat
step w again.
• The beep can be turned OFF in User set mode.
• When the transceiver is out of the communication area, “
”
disappears, and “NO SVC” message appears.
e To finish the conversation, push [DOWN] to send the
“Clear Down” signal.
D Selective call (DTMF call)
—Optional UT-108 is required—
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group.
w Push [Send DTMF]— a DTMF encode channel appears.
e Push [UP] or [DOWN] to select the desired DTMF encode
e Push [UP] or [DOWN] to select the desired DTMF encode
channel.
r Push [PTT] to transmit the selected DTMF code in the
selected DTMF channel.
• Push [P0] to cancel the DTMF transmission.
D Phone call
(Available for 10-keypad version only)
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group.
w Push [Phone request] to enable the phone call.
• “
” appears.
e Push [PTT] to connect the phone line.
• The proceed tone is emitted after connection to the phone line.
r While pushing and holding [PTT], enter the phone number
via the 10-keypad to make the call. Then release [PTT].
t Push [PTT] to transmit; release to receive.
y Push [#] while pushing [PTT] to finish the communication.
y Push [#] while pushing [PTT] to finish the communication.
Appears
!IC-F43TR.qxd 04.1.14 7:03 PM Page 11 (1,1)