Справочник Пользователя для ICOM 376500
1
PANEL DESCRIPTION
1-2
Front panel (Continued)
@0
@1
@2
@6
#3
#4
@8
@9
@3
#1
#0
@5
@7
@4
#2
@0 MEMO PAD KEY
MPAD
Sequentially calls up the contents in the Memo
Pads, or saves the displayed contents into the
Memo Pad.
Pads, or saves the displayed contents into the
Memo Pad.
@1 VFO/MEMORY KEY
V/M
(p. 3-1)
Switches between the VFO and Memory mode, or
copies the memory channel contents to the VFO.
copies the memory channel contents to the VFO.
@2 CLEAR KEY
CLEAR
Clears the RIT or TX shift frequency.
@3 A/B KEY
A/B
(p. 3-1)
Switches between VFO A and VFO B, or sets the
selected VFO’s frequency to the other VFO.
selected VFO’s frequency to the other VFO.
@4 TX KEY
TX
(p. 4-8)
Turns the TX function ON or OFF.
@5 RIT KEY
RIT
(p. 4-1)
Turns the Receiver Incremental Tuning (RIT)
function ON or OFF.
function ON or OFF.
@6 SPLIT KEY
SPLIT
(p. 4-10)
Turns the Split function ON or OFF.
@7 MULTI-FUNCTION CONTROL
MULTI
(p. 1-6)
Displays the Multi-function menu for various
adjustments, or selects a desired item.
adjustments, or selects a desired item.
@8 TRANSMIT FREQUENCY CHECK KEY
XFC
(p. 4-8)
Enables you to monitor the transmit frequency while
holding it down in the Split mode.
holding it down in the Split mode.
@9 TX/RX INDICATOR (p. 3-9)
Lights red while transmitting and lights green while
receiving.
receiving.
#0 NOISE REDUCTION KEY
NR
(p. 4-6)
Turns the Noise Reduction function ON or OFF.
#1 NOTCH KEY
NOTCH
(p. 4-6)
Turns the Notch ilter ON or OFF.
#2 TWIN PASSBAND TUNING CONTROL
TWIN PBT
CLR
(p. 4-3)
Adjusts the IF ilter’s passband width.
#3 PREAMP/ATTENUATOR KEY
P.AMP
ATT
(p. 4-1)
Turns ON or OFF, and selects one of two receive
RF preampliiers or turns the Attenuator ON or OFF.
#4 NOISE BLANKER KEY
NB
(p. 4-5)
Turns the Noise Blanker ON or OFF.