Справочник Пользователя для Levven Electronics Ltd. GRSUB
GoRave SOULSHAKER
READ & SAVE THESE
Operating Instructions
INSTRUCTIONS
Page 7 of 18
2.4 P
OWER
O
N
To turn on SOULSHAKER:
1. Insert the power cord into an AC outlet.
2. Ensure the power switch at the rear of the unit beside the AC power cord port is in the “I”
2. Ensure the power switch at the rear of the unit beside the AC power cord port is in the “I”
or on position.
3. The standby LED indicator above the power button will light indicating that it is powered.
4. Press the power button to bring the unit out of standby.
5. The standby LED indicator will go dark and the SKAA bond LED above the bond button
4. Press the power button to bring the unit out of standby.
5. The standby LED indicator will go dark and the SKAA bond LED above the bond button
will light indicating the unit is ready to receive a wireless signal from a SKAA transmitter.
2.5 C
LUSTERING
Make a Cluster of receivers:
1. Make sure the transmitter is powered off
2. Power on the Master receiver while holding down its SKAA Button—hold the button down
1. Make sure the transmitter is powered off
2. Power on the Master receiver while holding down its SKAA Button—hold the button down
until the Red LED begins to flash
3. With the remaining receivers within 3 meters of the Master receiver, power on the first one,
wait for its Red LED to flash and then power on the second one. Continue until all of them
are powered on.
are powered on.
4. Once all of the LEDs stop flashing (turn solid Red), power off all of the receivers
2.6 TV
S
ETUP
<Diagrams of Talisa and TV here>
a) Install the GoRave TV Transmitter into your TV.