Справочник Пользователя для Levven Electronics Ltd. GRSUB
GoRave SOULSHAKER
READ & SAVE THESE
Operating Instructions
INSTRUCTIONS
Page 9 of 18
Transmitter without manually
pressing Bond button each time.
pressing Bond button each time.
6-Click
Clear the Favorites List and reset
volume settings.
volume settings.
Red (flash) = list reset
2.9 P
LAYING
A
UDIO
F
ROM A
S
MARTPHONE OR
T
ABLET
D
EVICE
Go to http://gorave.com/support and select the “Transmitter” guide for a quick video tutorial
on this topic.
on this topic.
a) Insert a mobile GoRave Transmitter into your smartphone or tablet device.
b) Open the GoRave app. (Note: the GoRave volume control app needs to be open (but
b) Open the GoRave app. (Note: the GoRave volume control app needs to be open (but
can be minimized) when you are using the 30-pin Transmitter with a 30-pin Apple device.
The first time you connect a 30-pin Transmitter, you will automatically be taken to the
iTunes Store to download the app for your device.)
The first time you connect a 30-pin Transmitter, you will automatically be taken to the
iTunes Store to download the app for your device.)
c) Start playing audio on the device. At this point, the device is transmitting audio via the
Transmitter.
d) If the Transmitter is the only one transmitting and it has been added to your SOULSHAKER’s
Favorites List, then you will hear your audio playing.
e) If the Transmitter has not been favorited, follow the instructions in Section 3.6 to add your
Sender to the Receiver’s Favorites List.
f) If the Transmitter is not the only one transmitting and your SOULSHAKER is playing audio from
another source, follow the instructions in Section 3.8 to hear audio from a different Transmitter.
Favorites List, then you will hear your audio playing.
e) If the Transmitter has not been favorited, follow the instructions in Section 3.6 to add your
Sender to the Receiver’s Favorites List.
f) If the Transmitter is not the only one transmitting and your SOULSHAKER is playing audio from
another source, follow the instructions in Section 3.8 to hear audio from a different Transmitter.