Справочник Пользователя для Guided Therapeutics Inc 13500
November 2013, CNDS-0-635-MAN_3
Page 46 of 78
2.
Determine that the Touchscreen Monitor is dry. If it has not dried completely, use disposable task wipes to
wipe down the areas until dry. Discard wipe.
wipe down the areas until dry. Discard wipe.
3.
Inspect surface for cleanliness. Use one pre-saturated disinfectant wipe to completely pre-clean the surface
of all gross debris. Discard wipe.
of all gross debris. Discard wipe.
4.
Spray a new pre-saturated disinfectant wipe with additional disinfectant solution so that it is visibly
saturated. Wipe the surface of the monitor and bezel and the monitor-bezel interface with disinfectant wipe
so that the entire surface remains visibly wet for at least 1 minute. Discard wipe.
saturated. Wipe the surface of the monitor and bezel and the monitor-bezel interface with disinfectant wipe
so that the entire surface remains visibly wet for at least 1 minute. Discard wipe.
5.
Use a new pre-saturated disinfectant wipes to thoroughly wet the surface. Firmly rub the monitor and bezel,
and monitor-bezel interface with the wipe to ensure disinfectant contact for one minute. Discard wipe.
and monitor-bezel interface with the wipe to ensure disinfectant contact for one minute. Discard wipe.
6.
Using a new pre-saturated disinfectant wipe, rub the surface of the device so that it remains visibly wet for 3
minutes. Repeated use of pre-saturated disinfectant wipes and disinfectant spray may be required to ensure
the surface remains visibly wet for 3 minutes at room temperature (65° F) /(18° C )
minutes. Repeated use of pre-saturated disinfectant wipes and disinfectant spray may be required to ensure
the surface remains visibly wet for 3 minutes at room temperature (65° F) /(18° C )
7.
Discard used wipes.