Справочник Пользователя для SHEN ZHEN XING YAO HUA INDUSTRIAL CO. LTD T6AH-2400

◇To Access the Differential Aileron Mixing Function
Press the DOWN and SELECT keys simultaneously to access the Function Mode.

In Function Mode, use the UP or DOWN key to select the Differential screen.

Press the INCREASE or DECREASE keys to adjust the Differential value.

Note: Increasing the value will reduce the amount of down travel in each aileron.

If differential is working in reverse, it means the aileron servos are plugged into the

wrong channels. The right aileron should be plugged into the aileron channel,

while the left aileron should be plugged into the flap channel.
◆throttle idle
Throttle idle function used to safety close engine, for fixed wing

aircraft, it is always a very safe switch, lock throttle to the closed position. When

the throttle lock switch is activated, and all the other servos are normal, throttle

idle function lock throttle servo/ESC to specific position (normal low or close the

throttle). Throttle idle switch is also can be selected. Switch choice positions

including rudder double proportion, auxiliary 2, aileron double row or the elevator

servo's double ratio switch position

◇To Access the Throttle Idle Function
Press the DOWN and SELECT keys simultaneously to access the Function Mode.

In Function Mode, use the UP or DOWN key to select the THRO HOLD screen.

Press the INCREASE or DECREASE key to activate the throttle idel function.

When activated, press the INCREASE or DECREASE key to change the throttle

idel value.
◇To Access the Throttle Idle Switch Function
Press the SELECT key to highlight switch.

Press the INCREASE or DECREASE key to select the desired switch.
◆Programmable Mixing 1–6
The T7AH-2400 offers six programmable mixes that allow stick or switch inputs to

control the output of two or more servos. This function allows any channel mixing

to any other channel, or to mix a channel to itself. The mix can remain ON at all

times, or it can be switched OFF when using a number of different switches in flight.

Mix values are adjustable from 0 to 125%. Each channel is identified by a four-

character name (i.e., Aileron - AILE, Elevator - ELEV, etc.). The channel appearing

first is the master channel. The second channel is the auxiliary channel. For

example,AILE - RUDD indicates aileron-to-rudder mixing. Each time the aileron

stick is moved, the rudder will automatically move in the direction and to the position

based on the value input in the programmable mix screen. Mixing is proportional,

because small inputs of the master channel will produce small outputs of the slave

channel. Each programmable mix has a mixing offset. The purpose of the mixing

offset is to redefine the neutral position of the slave channel.

◇Assigning Channels
Press the DOWN and SELECT keys simultaneously to access the Function Mode.

In Function Mode, use the UP or DowN keys to select the desired PROG. MIX

screen (1–6).

Press the INCREASE or DECREASE keys to select the desired master channel.

Press the SELECT key to highlight the slave channel.

Press the INCREASE or DECREASE keys to select the desired auxiliary channel.

[PROG.MIX1]

THRO THRO ON

RATE: 0%

SW:ON
OFFSET: 0

or SLAVE CHANNEL

Press to enter PROG MIX

Press to enter
Function Mode

Press to return
value to default

Press to highlight
MASTER CHANNEL
or SLAVE CHANNEL

Press to select MASTER CHANNEL

[PROG.MIX1]

THRO THRO ON

RATE: 0%

SW:ON
OFFSET: 0

Press to enter PROG MIX

Press to enter
Function Mode

Press to return
value to default

Press to highlight
RATE

Press to adjust

MIX

value

[THRO IDL]

SW:RUDD D/R

HOLD POS. -5.0%

Press to enter THROTTLE HOLD

Press to enter
Function Mode

Press to return
value to INH

Press to select
desired channel

Press to activate THROTTLE HOLD and change values