Справочник Пользователя для SHEN ZHEN XING YAO HUA INDUSTRIAL CO. LTD T6AH-2400

The Exponential function allows two exponential rates to be programmed and 

selected with a switch. Exponential is available on the aileron, elevator and rudder

 channels. Changing the exponential value does not affect the maximum control 

authority but only affects control sensitivity. Exponential is normally used to reduce

 control sensitivity around neutral while still allowing high control authority at the 

extremes of throw. The sensitivity around center can be tailored using the 

Exponential function to precisely adjust control feel.Exponential rates can be 

controlled by their respective rate switches (aileron, elevator and rudder), 

or combined on a flight mode switch. Exponential is available for the aileron, 

elevator and rudder channels. Expo values are adjustable from -100% (full negative

 expo), LIN (linear), and +100% (full positive expo). The factory default settings for

 both the 0 and 1 switch positions are LIN or 0%. Either switch position may be 

selected to give any desirable EXPO rate by placing the switch in the desired 

position and adjusting the value accordingly.

◇To Adjust the Exponential
Press the DOWN and SELECT keys simultaneously to access the Function Mode.

In Function Mode, use the UP or DOWN keys to select the DUAL RATE AND 

EXPONENTIAL screen.Press the INCREASE or DECREASE key to select the 

desired channel (AILE, ELEV or RUDD).Move the selected channel's dual rate

 switch to the desired position, 0 or 1.Press the SELECT key until EXP is highlighted.

Adjust the Expo rate values for the selected switch position using the INCREASE 

or DECREASE keys.

◆Auto Dual Rate EXP
The Auto Dual Rate and Expo function allows Expo and Dual Rate values (aileron,

 elevator and rudder) to be automatically selected in each flight mode (Normal, 

◇To Adjust the Auto Dual Rate
Press the DOWN and SELECT key simultaneously to access the Function Mode.

Press the UP or DowN key until the AUTO D/R EXP screen appears on screen.

Use the select key to select NORMAL, ST1 ST2 or NORMAL mode.

When selected, press the INCREASE or DECREASE key to select DUAL RATE, 

P-1, P-2 or INHIBIT.

◆Reverse Switch
The Reverse Switch function allows electronic means of reversing the servo’s throw.

 Servo reversing is available for all seven channels.

◇Accessing the Reverse Switch Function
Press the SELECT key to access the desired channel.

Press the INCREASE or DECREASE keys to reverse the servo direction for that

selected channel.

[D/R  &  EXP]

POS-0

AILE

D/R    100%

EXP    LIN

OUTPUT

Press to adjust value

Press to enter DUAL 

Press to enter
Function Mode

RATE and EXPONENTIAL

Press to select 
desired function

Press to return value 

to default setting

[AUTO  D/R  &  EXP]

NORM          INH
ST-1             INH

Press

 

to

 

adjust

 

value

Press to enter 

Press to enter
Function Mode

Press

 

to

 

select

 

desired

 

flight

 

mode

Press to return value 

AUTO DUAL RATE 

to default setting

ST-2             INH

[

REVERSING  SW

]

NORM

GEAR

ch 1    2   3   4   5   6    7

 

REV.

Press to select REV. or NORM

Press to enter REVERSE

Press to enter
Function Mode

Press to select
desired channel

St1, ST2, and Hold.) When an auto dual rate flight mode is inhibited, the dual rate

is defaulted to the correlating switch and dual rate switch positions.