Unauthorized personnel can view patient records stored in the device.
Hospital policies and practices must prevent unauthorized access to
the monitor.

CAUTIONS

As with all medical equipment, carefully route patient cabling to reduce
the possibility of patient entanglement or strangulation.

Do not place VC150 monitor cables or accessories in any position that
might cause them to fall on the patient. Do not lift the monitor or
accessories by the patient cables.

Ensure that any hoses or cables between the monitor and the patient
are long enough and that patient will not become pinched or pulled on.

Always remove the sensor from the patient and completely disconnect
the patient from the sensors before bathing the patient.

Do not place the monitor where the controls can be changed by the
patient.

To comply with the exposure requirements for wireless networks
(WLAN), the monitor must be operated with a separation distance of 20
cm or more from a person's body.

Do not place the VC150 monitor touch screen against a surface.

Do not place the monitor on electrical equipment that may affect the
monitor, preventing it from working properly.

Do not expose the monitor or accessories to excessive moisture such as
direct exposure to rain.

Do not place containers containing liquids, gases, or other flammable or
humid material on or near the monitor.

Patient Safety - If a sensor or a cable is damaged in any way,
discontinue use immediately.

The SpO

sensor site must be inspected at least every two (2) hours to

ensure adequate adhesion, circulation, skin integrity and correct optical
alignment; and if the circulatory condition or skin integrity has
deteriorated, the sensor should be applied to a different site.

To ensure patient electrical isolation, connect only to other equipment
with electrically isolated circuits.