Справочник Пользователя для Innokas Yhtyma Oy VC150

B-4

VC150 Vital Signs Monitor

KO00065K

Maintenance: Calibration

Do not use damaged sensors, cables, or connectors.

User can only recalibrate the touch screen. Refer to 

on page 3-9, if necessary. No other user-lever calibrations are required. 

Use only these cleaning agents to clean the monitor unit or the Welch Allyn 
probe well. Periodically, Innokas Medical evaluates additional cleaning agents 
for compatibility with the monitor. If your cleaning agent is not listed in this 
section, contact your Innokas Medical representative to determine if additional 
information is available.

The touch screen surface is made of PET (polyethylene terephthalate) and 
must not be cleaned with any solvent or any alkaline cleaning agent.

If you want to use other cleaning agents than those specifically approved 
and listed in this section, you can do it at your own risk. However, bear in 
mind that using non-approved cleaning agents voids the product warranty 
on all monitor parts that may come in touch with non-approved cleaning 
agents. If you still want to use a non-approved cleaning agent, first test it on 
the corner of the touch screen, not on the whole screen. Remember to wipe 
off possible residues or stains with a cloth dampened with water.

Cavicide

®

 Surface 

Cleaner/Disinfectant

Sagrotan

®

 

Alternative

Sani-Cloth

®

 HB

Sporicidin

®

Virex 256

Water (distilled)

Windex Blue

Probe well

Warm water and a mild detergent solution.

Thermometry probe

70% Isopropyl alcohol 10% bleach solution and 
Cavicide

® 

or equivalent.