Справочник Пользователя для Innokas Yhtyma Oy VC150

3-10

VC150 Vital Signs Monitor

KO00065K

Getting started: Monitor on/off

The monitor has an automatic standby feature in order to conserve battery life. 
If the monitor is in clinical mode and has been inactive for a period of time, the 
screen turns black and the monitor switches to standby mode. Within first two 
minutes of standby, you can activate the monitor again by touching the screen. 
After two minutes of standby, press the On/Off button to activate the screen 
again. The inactivity timer can be adjusted in configuration mode. When running 
on battery, the monitor is automatically shut down after 15 minutes of standby, 

Refer to 

on page 2-10 for a description of clinical mode.

The monitor will not automatically switch to standby mode if 1) this is 
disabled in configuration mode, or 2) a visible alarm (low, medium, high) is 
displayed on screen during monitoring mode.

The monitor switches to standby when:
•

The touch panel has not been operated for a configured period of time, and

•

There are no ongoing measurements.

Push On/Off button briefly to put the monitor into a 
standby state. This is possible if the monitor is in spot-
check mode or there are no ongoing measurements 
in monitoring mode.

Unless disabled by service, the monitor will 
automatically switch to standby mode if monitor has 
been idle for a configured period of time and not 
currently used for patient monitoring. If the monitor is disconnected and remains 
in standby mode for over 15 minutes, the monitor will shut down.

Push the On/Off button again or touch the screen to resume the active clinical 
mode.