Справочник Пользователя для ALPWISE BLEM003
ALPW-BLEM003
Bluetooth® Smart Embedded Module
Datasheet
ALPWISE S.A.S. – LE PULSAR, 4 Avenue Doyen Louis Weil, 38000 GRENOBLE, France
Tel: +33 4 76 22 02 24– Email: alpwisesales@alpwise.com –
Tel: +33 4 76 22 02 24– Email: alpwisesales@alpwise.com –
Revision 1.2
10
EN60950-1
EMF
EN 62311 (2008) : Limitation of human
exposure to electromagnetic fields
exposure to electromagnetic fields
RADIO
EN 300 328 v1.7.1 : Electromagnetic
compatibility
compatibility
and
Radio
Spectrum
Matters (ERM)
10 Cautions
10.1
Installation notes
The product should be mechanically stressed
when installed.
Reflow soldering is possible, according to the
recommendations in chapter 5.
when installed.
Reflow soldering is possible, according to the
recommendations in chapter 5.
10.2
Usage conditions notes
This
product
has
limited
ESD
protection. Take measures to protect
the unit against static electricity,
especially in dry atmosphere.
the unit against static electricity,
especially in dry atmosphere.
Follow the operating conditions regarding the
power supply applied to the product.
This product is intended for general purpose and
standard use in general electronic equipment. For
applications in a particular environment, please
contact the technical support.
All external circuits connected to our device shall
be of SELV type (Safety Extra Low Voltage), and
shall be qualified as Limited Power Souces, as
defined in chapters 2.2 and 2.5 of IEC60950-
1:2005+/A1:2010
and
EN60950-
1:2006+/A11:2009+/A1:2010+/A12:2011.
All power sources provided to our device shall be
of SELV type (Safety Extra Low Voltage), and shall
be qualified as Limited Power Souces, as defined
in chapters 2.2 and 2.5 of
All power sources provided to our device shall be
of SELV type (Safety Extra Low Voltage), and shall
be qualified as Limited Power Souces, as defined
in chapters 2.2 and 2.5 of
IEC60950-
1:2005+/A1:2010
and
EN60950-
1:2006+/A11:2009+/A1:2010+/A12:2011.
The antennas and antenna cables connected to
our device shall always remain indoor, and in the
same building as our device.
Do not wash the product.
The antennas and antenna cables connected to
our device shall always remain indoor, and in the
same building as our device.
Do not wash the product.
10.3
Storage notes
In
order
to
preserve
the
performance
characteristics of the module, do not store the
product in the following conditions:
product in the following conditions:
Storage in an environment where the
temperature may be outside the 5°C to 35°C
range
temperature may be outside the 5°C to 35°C
range
Storage in an environment where the
humidity may be outside the 45% to 85%
range
humidity may be outside the 45% to 85%
range