Справочник Пользователя для Unique Broadband Systems Ltd. DRU200
Chapter
4
Commissioning
13. Switch ON the LBE 25A circuit breaker, located on the BMS front panel.
o
Ensure that the LBE Power LED is illuminated green and that the internal fan is
rotating continuously. Note: Fan operation will be halted momentarily during the
boot-up process, but will continue to operate continuously.
boot-up process, but will continue to operate continuously.
14. Switch ON the HBE 10A circuit breaker, located on the BMS front panel.
o
Ensure that the HBE Power LED is illuminated green and that the internal fan is
rotating continuously.
15. Switch ON the HPA-L 5A circuit breaker, located on the BMS front panel.
o
Ensure that the LB HPA LED flashes red and green alternately.
16. Switch ON the HPA-H 5A circuit breaker, located on the BMS front panel.
o
Ensure that the HB HPA LED flashes red and green alternately.
17. Switch ON the SPARE 2.5A circuit breaker, located on the BMS front panel.
o
Ensure that the BMS alarm LEDs are no longer illuminated red; only the CTR LED
should be illuminated green.
18. Switch ON the LB HPA PSU circuit breaker (CB2), located on the PDU.
o
Ensure that the LB HPA PSU (PS 2) Norm LED is illuminated green.
o
Ensure that the LB HPA front panel LED is illuminated blue.
19. Switch ON the HB HPA PSU circuit breaker (CB1), located on the PDU.
o
Ensure that the HB HPA PSU (PS 1) Norm LED is illuminated green.
o
Ensure that the HB HPA front panel LED is illuminated blue.
4.4.2 Repeater Configuration
Repeater configuration involves verifying, changing, and/or setting parameter values that
allow the repeater to operate from its assigned location. The operator will be required to
allow the repeater to operate from its assigned location. The operator will be required to
configure the following:
• Low Band Exciter (LBE)
• High Band Exciter (HBE)
• Terrestrial Repeater Monitoring System (TRMS)
• High Band Exciter (HBE)
• Terrestrial Repeater Monitoring System (TRMS)
4.4.2.1
Low Band Exciter (LBE) Configuration
Please refer to SiriusXM instructions as well as the LBE Operating Manual to configure the
exciter with specific settings for its assigned location.
exciter with specific settings for its assigned location.
4.4.2.2
High Band Exciter (HBE) Configuration
Please refer to SiriusXM instructions as well as the HBE Operating Manual to configure the
exciter with specific settings for its assigned location.
SX03-10000-01-M01 4-3