Справочник Пользователя для Unique Broadband Systems Ltd. DRU2KW

Manual No. x75mk3-11

x75-man-Rev11-0815.indd

 

When the X75 is first accessed using a WEB browser the Controller Status page 

shown below is displayed.

 

 

The following describes the function of the different parts of the applet with the 

exception of FACTORY SETTINGS which is reserved for UNIPOWER use.

 

At the top is the site name.  This can be changed in the installation applet.

 

Next is the main system bus voltage.  Note that this will always show as an unsigned 

value even in systems that have a negative voltage with respect to chassis ground.

 

Next to the system voltage is an indicator of the state of the system.  The various 

possible indicators are as follows:

FLT

  Indicates that the system is in float mode without any temperature 

compensation.

TC

 

Indicates that the system is in float mode with temperature compensation 

applied.

CHG

  The system is bulk charging the batteries.

EQ

 

The system is equalizing or boosting the battery voltage.

BD

 

The system is in battery discharge.

TST

  The system is performing a battery test.