Справочник Пользователя для Extron Electronics EXTSL250W

 

 GateKeeper Panel: GateKeeper provides network security settings for the  

ShareLink 250 W, as well as basic data management between the wireless LAN and the 
ethernet LAN.

NOTE:  Regardless of which GateKeeper setting is selected, users can connect to 

the ShareLink 250 W through its internal wireless access point.

• 

All Pass: Users connected to the wireless LAN can connect to the  

ShareLink 250 W and can access the wired (ethernet) LAN.

• 

All Block: Users connected to the wireless LAN can connect to the  

ShareLink 250 W, but cannot access the wired LAN. All data is blocked, including 
port 80, which is typically used for internet access.

• 

Internet Only: Users connected to the wireless LAN can connect to the  

ShareLink 250 W and can access port 80 (for internet access only). All other data is 
blocked.

WiFi Setup

1

 Wireless LAN Panel:

Wireless LAN is enabled by default. Choose Disable to disable wireless LAN 

connection.

2

 Mode Panel

There are three Wi-Fi modes for the ShareLink 250 W:

• 

AP (Access Point) mode (see 

 on the next page)

• 

 on page 44)

3

 WiFi signal intensity:

Select Maximum, High, Medium, or Low